Thread Locking Adhesives
Pratley Pratlok® Grade 0-6
Low Strength (Purple lid). Typically for screws in the 0-6mm size range. ...
Pratley Pratlok® Grade 6-10
Medium Strength (Blue lid). Typically for M6-M10 nuts and bolts. ...
Pratley Pratlok® Grade 10-20
High Strength (White lid). Typically for M10-M20 studs and bolts. ...
Pratley Pratlok® Grade 20+
High Strength (Red lid). High viscosity thread locker for >M20 threads and for flanged assemblies and gap filling. ...
Pratley Pratlok® Grade HYD
Medium Strength (Brown lid). Suitable for fine threads on hydraulic and pneumatic connections. ...
Pratley Pratlok® Grade BRG
Medium/High Strength (Green lid). Low viscosity retaining grade for retaining bearings onto shafts, into housings or for bushes and other cylindrical close tolerance assemblies. ...
Pratley Pratlok® Grade H-Temp
High Strength (Orange lid). High temperature thread locker. Typically for M10-M20 studs and bolts. ...
Pratley Pratlok® Grade PEN
Medium Strength (Yellow lid). Ultra low viscosity thread locker for "wicking into pre-assembled fasteners, press fits and knurls. ...
Pratley Pratlok® 10g Grade 10-20
High Strength (White lid). Typically for M10-M20 studs and bolts. ...
Pratley Pratlok® 10g Grade 6-10
Medium Strength (Blue lid). Typically for M6-M10 nuts and bolts. ...
Pratley Pratlok® 10g Grade BRG
Medium/High Strength (Green lid). Low viscosity retaining grade for retaining bearings onto shafts, into housings or for bushes and other cylindrical close tolerance assemblies. ...