The best method for repairing a cracked engine sump or metal housing
You will start by identifying the ends of the crack. Using a 2mm drill bit, drill the ends of the crack to prevent the crack from running any further. ...readmore
You will start by identifying the ends of the crack. Using a 2mm drill bit, drill the ends of the crack to prevent the crack from running any further. ...readmore
Before you begin, please read our tip entitled “A simple test to find out if your material/substrate is a good candidate for adhesive bonding.” Firstly you will roughen up the surfaces of the substrate you intent bonding/sticking with a course grade sand paper.